TG300 B

Faulted Circuit Indicator Tester

With the powerful four channel current sources TG300B can be used to check the performace of fault indicators easily. The 4 x 250A current sources can also be parallelly connected to get maximum 1000A output. The compact and portable design also makes it suitable for both indoor and outdoor use.  It can also be used to check the substaion system phase sequence by injecting three-phase symmetrical currents from primary side.

  • Four current outputs upto 250A max

  • Output can be AC or DC

  • Current outputs fully programmable

  • High power and long output time

  • For desktop use or rack mount

  • Compact and lightweight


Range: 4 x 250A / 1000VA
Accuracy: error < 0.5 % rd.+ 0.05 % rg. typ.
Output time: > 3 Min. at Imax

Range: DC~200Hz
Accuracy: ±2ppm
Resolution: 0.001Hz

Phase angle range: 0°~±360°
Phase angel accuracy: <0.1º typ. at 50Hz/60Hz
Phase angle resolution: ±0.003°

Binary inputs: 4
Binary outputs: 2
Installation: desktop or rack mount
Weight:  ≤20kg


  • Your Content Goes Here

  • Your Content Goes Here

  • Your Content Goes Here